Description
Main Features
- Precision ground and hardened bed ways.
- The spindle is supported with precision roller bearings.
- Headstock gears are made of high quality steel, ground and hardened.
- Two different lengths of bed are available.
- With or without cabinet according to requirement.
Specification
| Specification | CJM360 |
| Max. swing diameter over bed | 360mm |
| Max. length of work piece | 750mm |
| Max. swing diameter over middle carriage | 200 mm |
| Spindle bore | 40mm |
| Taper of hole in spindle | MT5 |
| Max. cross stroke over tool carrier | 160mm |
| Max. longitudinal stroke over tool carrier | 100mm |
| Metric thread kinds | 22 |
| Metric thread pitch | 0.20-7mm |
| Inch thread kinds | 45 |
| Inch thread pitch | 21/2-48 1/n″ |
| Modulus thread kinds on processing | 21 |
| Modulus thread pitch on processing | 0.20-3.5mm |
| Diametrical thread kinds on processing | 31 |
| Diametrical thread pitch on processing | 8-120 1/n″ |
| Longitudinal feed on spindle tool carrier | 0.10-1.40mm/r |
| Cross feed on spindle tool carrier | 0.045-0.60mm/r |
| Max stroke on taper hole | 80mm |
| Taper of Tailstock | MT3 |
| Step of spindle speed | 12 |
| Range of spindle speed | 60-1600r/mim |
| N.W. | 420kgs |
| G.W. | 470kgs |
| Overall size(L×W×H) | 1580×785×1390mm |
| Packing size(L×W×H) | 1600×800×1500mm |
Tersedia juga model lain.
Untuk Info Harga Silahkan Hubungi 0858-7630-0414 (Fast respon)
