Sealant Injector Hose SPK-2C

Multi Sarana Industrindo menjual berbagai macam kebutuhan industri, seperti : metal conductivity tester, oil flow meter/oil control valve, paper thickness gauge, pressure gauge, alat ukur minyak, alat ukur makanan, alat ukur kimia, alat ukur metalurgi, alat ukur tenaga listrik, radiation detector, detektor radiasi, dosimeter alarm radiasi pribadi, alat detektor radiasi nuklir

Category: Tag:

Description

Description:

The sealant injector hose SPK-2C is a hose imported from Japan. It is the connection between the manual glue gun and the generator end cover for sealing hydrogen sealant on the generator end cover. It is mainly used for the hydrogen cooled generator in Fossil fuel power station to fill sealant. The glue injection speed can be adjusted as required. The glue injection gun hose SPK-2C is made of high-quality PVC, with good corrosion resistance, economic use, good safety and convenient control

 

Parameter:

The operating temperature of the glue injection gun hose SPK-2C is between 10-50 °C, the air pressure is between 0.6-0.9MPa, and the air volume is not less than 1m ^ 3/min. Before each use of the glue injection gun, open the valve cover and check whether the locknut on the adjusting screw is loose. If it is loose, tighten it. When it is empty, check whether the glue injection gun is normal.

 

 

Tersedia juga model lain.
Silahkan chat/WA ke no 0858-7630-0414 (Fast respon)

Related Products