Description

Description:

Boiler Feed Pump Oil Baffle 3FK5F32M-06-04 is an important accessory for the boiler feed pump in power plants.

Water supply pumps can be used to transport clean water or liquids with physical and chemical properties similar to clean water. They are used for medium and low pressure boiler water supply pumps and are also suitable for high-pressure water supply and drainage in factories or cities. The temperature of the conveying medium is -20C-150C, and the allowable inlet pressure is less than 0.6MPa. The water supply pump adopts a hydraulic model of high-efficiency and energy-saving products recommended by the country. It has the advantages of high efficiency, wide performance range, safe and stable operation, low noise, long service life, and convenient installation and maintenance.

The inlet and outlet of the water supply pump are vertically upward, and the pump casing parts such as the inlet section, middle section, outlet section, and bearing body are connected together by tightening bolts. Select the number of stages of the pump based on its head. The rotor part of this type of pump mainly consists of a shaft, an impeller installed on the shaft, a shaft sleeve balance plate, and other parts, among which the number of impellers depends on the number of stages of the pump. The parts on the shaft are fastened with flat keys and shaft nuts to form an integral part with the shaft. The entire rotor is supported by rolling bearings or sliding bearings at both ends. Bearings are determined by model and do not withstand axial force, which is balanced by a balance plate. The pump allows the rotor to move axially in the pump casing during operation, without using radial ball bearings. Rolling bearings are lubricated with grease, sliding bearings are lubricated with thin oil, and self-lubricated with oil rings and cooled by circulating water.

Tersedia juga model lain.
Silahkan chat/WA ke no 0858-7630-0414 (Fast respon)