Description
Main Features
- Using the counter spindle and the back tool post, front and back processing can be performed at the same time.
- Equipped with 3-axis lateral powerhead, lateral rigid tapping, front rigid tapping, back rigid tapping.
- Equipped with no guide sleeve device, which is most suitable for high precision machining of short workpieces.
- Adjust the chuck with the clamping force of the main shaft and the back shaft, which can easily clamp fine and precise parts Fixed guide bushes and linked guide bushes have better benefits.
- The main shaft oil-cooled electric spindle has no dead angle cooling at high speed, and it has more uniform heat dissipation and stronger performance than ordinary air-cooled electric spindle.
- This machine adopts absolute operation, no need to return to the original point on and off, saving time and labor and labor. Uninterrupted power supply for 24 hours, high efficiency and labor saving.
Specification
| Specification | B13 | |
| Power | rated voltage | 3 phase AC 380V |
| rated frequency | 50HZ | |
| total input power | 10kw | |
| CNC SYSTEM | LNC | |
| Minimum setting unit | 0.001mm | |
| Minimum moving unit X | 0.0005mm | |
| Minimum moving unit Z | 0.001mm | |
| Cutting speed | 1–4000mm/min | |
| X rapid travel speed | 15000mm/min | |
| Y rapid travel speed | 15000mm/min | |
| Z rapid travel speed | 15000mm/min | |
| Spindle | Max. bar throught hole | Φ13mm |
| spindel through diameter | Φ14mm | |
| Spindle center height from the ground | 1010mm | |
| Spindle revolving speed | 0-5000r/min | |
| spindle motor power | 2KW | |
| Sub-spindle | Max. clamping dia. | Φ13mm |
| Revolving speed. | 0-5000r/min | |
| Motor power | 2KW | |
| Stroke | X1 stroke | 60mm（Dia. value） |
| Y1 stroke | 230mm | |
| Z1 stroke | 150mm | |
| X axis servo motor power | 750W | |
| Y axis servo motor power | 1KW | |
| Z axis servo motor power | 1KW | |
| Guideway | Linear guideway | |
Tersedia juga model lain.
Untuk Info Harga Silahkan Hubungi 0858-7630-0414 (Fast respon)
