Description
Main Features
-
Guide rail width=600mm.Load capacity=2.5 tons. Swing over bed:800mm.
-
Threading Inch, Metric, Module and D.P.;
-
Perform drilling, boring and groove broaching;
-
Respectively with through-hole spindle bore, that can hold bar stocks in larger diameters;
-
Both Inch and Metric system are used on these series lathes, it’s easy for people from different measuring systems countries;
-
There are hand brake and foot brake for users to choose;
-
Power supply of different voltages (220V/380V/420V) and different frequencies (50Hz,60Hz) are available.
Specification
| Specification | Unit | CW6180B CW6280B |
| Swing over bed | mm | 800 |
| Swing over toolpost | mm | 480 |
| Workpiece length | mm | 1000/1500/3000/4000/5000 |
| Swing in gap/width | mm | 1000/310 |
| Spindle bore | mm | 105mm D11 130mm D11 |
| Spindle front taper | 120mm MT5 | |
| Spindle speed an range | rpm | 18 kinds 7.5~1000 |
| Cross feed step and range | mm/r | 64 kinds 0.05~24.3 |
| Range 1:1 | 0.1~1.52 | |
| Range 16:1 | 1.6~24.3 | |
| Change gears micro feed range | mm/r | 0.05~0.912 |
| Ratio of longitudianl feed to cross | 1/2 | |
| Gap rapid speed | mm/min | 4000 |
| Leadscrew pitch | 12(metric) 1/2(inch) | |
| Metric thread | mm | 50 kinds 1-240 (other type thread 14 kinds) |
| Inch thread | TPI | 50 kinds 1-240 (other type thread 14 kinds) |
| Module thread | mm | 53 kinds 0.5-120 |
| Pitch thread | DP | 24 kinds 28-1 |
| Lower toolpost travel | mm | 500 |
| Upper toolpost travel | mm | 200 |
| Tailstock travel | mm | 250 |
| Tailstock taper | MT6 | |
| Bedway width and hardness | mm | 550 RC50 |
| Main motor | KW | 11 |
| Rapid motor | KW | 1.1 |
| Coolant pump motor | W | 90 |
| Loading weight | kg | 2000/3000 |
Tersedia juga model lain.
Untuk Info Harga Silahkan Hubungi 0858-7630-0414 (Fast respon)
